Kreg Mini Drilling Depth
First you want to adjust the collar on the 2-set drill bit to control the depth of the pocket hole.
Kreg Mini Jig Position
Next you want to make sure you clamp down the Kreg-Mini the appropriate distance from the edge of the material based on the thickness of the wood you are joining.
Kreg Mini Setup
| Board Thickness | Depth Collar | Jig Distance From Edge | Screw Length |
|---|---|---|---|
| 1/2" | 3-5/16" | 1/4" Over | 1" |
| 3/4" | 3-1/2" | 0" | 1-1/4" |
| 1-1/2" | 4-1/4" | 1-1/4" Back | 2-1/2" |
The table above summarizes the Depth Collar Adjustment, Distance from Edge and Screw length for 1/2", 3/4" and 1-1/2" boards or plywood.
Comments (29)
Join the Discussion (29)